Changzhou jianhua auto parts factory: how to maintain a car in daily life (I)

2019-07-02 Author：admin

　　A, clean
　　Air contains a large number of dust, sand and acid substances, not only easy to be leaked fuel adhesion, baking in high temperature is easy to form a hard insulation layer, so that the heat dissipation of the parts of the poor performance, but also easy to be the body of electrostatic absorption and erosion of the paint surface, make its premature fading.
　　1. Clean the air filter
　　Too dirty air filter will block the fresh air into the cylinder, resulting in gas concentration, incomplete combustion, power reduction, exhaust exceeds the standard. Modern air filters generally use paper filter elements, cleaning attention: do not use water or oil washing, should use the patting method and blow washing method. Patting method that gently pat filter element face, so that dust off. Blow washing means that the inside of the compressed air filter element is blown outwardly, and the air pressure shall not exceed 0.3n /Pa
　　2. Clean the oil filter
　　Engine engine filters become clogged, blocking the flow of lubricants, causing poor lubrication, wear and even burn. To this end, should be regularly cleaned or replaced. Usually change every 8000km, if the weather is dry. It should be shortened to 5000km for replacement once.
　　3, clean the battery
　　Modern cars generally use maintension-free battery, first clean the battery top, to avoid short circuit caused by electrolyte or other impurities between poles; Secondly, clean the battery terminal, prevent the connection from oxide and lead to poor contact. The air vent should be unblocked, so as not to burst the hand due to the high pressure or temperature in the battery.
　　This paper is organized by changzhou jianhua vehicle parts factory